Reverse Vertical Laminar Air Flow

Product Description

The work area is separated from the external environment by the following devices:

• The reverse laminar flow booth is formed by a stainless steel; AISI 304 scotch brite finished self-supporting structure, provided with rounded corners for easy cleaning.
• A negative pressure inside the booth prevents the escape of fine powder from the work area towards the external environment.
• A perforated diffuser panel made of stainless steel shields the upper filtration area.
• 5/15 amps electrical points on the panel
• CFL lighting through diffuser provided on the panel
• Internal height can be adjusted as per requirements. Standard height is 6™/1830 mm.

Motor / Blower assembly: Direct drive, continuous duty ¼ HP with sealed bearings. Motor assembly is mounted on FRP casing to reduce noise vibration and is dynamically balanced.

Size Rate

• 3™ X 2™ X 6™ 

• 4™ X 2™ X 6™ 

Type Horizontal

Surface Finish Polished

Usage/ApplicationLaboratory

MaterialStainless Steel

Air Flow90 FPM (0.45 m/s) 10 FPM (0.05 m/s) average velocity measured 6 in. (152.4 mm) from the diffuser sc

ApplicationIt is used to control hazardous emissions of powder, dust or vapour during powder dispensing, drum t

Efficiency(%)98%

Height 6 Ft.

SizeAvailable in 3 X 2 X 6 and 4 X 2 X 6 Inch

Power1/4 HP

Steel GradeSS304

Noise level65 5 DB measured from filter face