Water Bath

We manufacture & provide superior quality bacteriological incubator which is fabricated using qualitative raw material. Our bacteriological incubators are double walled with the outer body fabricated with mild steel while the inner body in mild steel, or stainless steel. The inner body is lagged with glass wool & the temperature controlled by capillary type thermostat, temperature range 5C above ambient to maximum 60C with accuracy range of 2C. Within the incubator, glass door is available.

(Body Made of M.S. galvanized & power coated) Features: 2 Functional Mode Continuous, intermittent 3D Shifting Motion Simultaneous Programing Features for Continuous & Intermittent Mode. Total cycle Time can be Distributed Between Continuous & Intermittent Mode As Per Requirement which Allows More Precise Results

Double walled inner made of thick stainless steel / mild steel, outer made of heavy duty mild steel / G.I. duly powder coated. Temp range 50C to 250C Temp accuracy 2C controlled by thermostatic

offers high-quality, durable, and robust walk in chambers that serve the testing needs of various industries. This particular equipment serves the testing needs of humidity and temperature conditions in industries such as chemical, agricultural, agrochemical, etc. They are needed for medium- to long-term as well as accelerated studies in stability. Our walk in chamber comes with modern features, through which you can be sure of getting high-quality and precise results time and again.

Doubled walled inner made of S.S & outer made of mild steel powder coated/S.S. Temp is controlled by thermostat. Lid will be supplied with 6/12 holes at 3 Dia with concentric rings.

A stability chamber is a device used to artificially replicate various environmental conditions by procedurally altering just two specific factors. Temperature and relative humidity. A stability chamber is thus used comprehensively in the testing of drugs & medicines in the pharmaceutical industry, to determine the basic shelf-life of the said drugs along with their resistance to environmental changes. The stability chamber can be classified into environmental chambers, temperature humidity chambers, accelerated test chambers, and photo stability chambers, cold chambers, depending on the respective parameter of testing. Physically, they are classified into reach-in chambers which are smaller in size, and walk-in chambers which are large enough to be walked into. A stability chamber works by using compressors to maintain the temperature in the chamber, and thus, the relative humidity, which it also does by the use of a separate water reserve through boiler heater. As a leading stability chamber manufacturer, our innovative designs and precise engineering contribute to the reliability and performance of these essential testing devices.

As per ICH-Q1B For Confirmatory studies, sample should be exposed to light providing an overall illumination of not less than 1.2 million lux hours and an integrated near ultraviolet energy of not less than 200 watt hour/square meter to allow direct comparison to be made between drug substance & drug product.

wheel mounted cabinet is double walled with inner chamber of stainless steel & outer wall of M.S. Sheet duly powder coated. Double walled back of the unit is fitted with air circulation fan for maintaining temperature uniformity throughout the chamber. Full view inner glass door permits inspection of specimens without disturbing the same. Lock & Key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The front panel is provided with separate indicator lamps for main, heating & incoming voltage. Supplied complete with adjustable shelves, cord & plug to work on 220/230 volts A.C. supply. The temperature range is from 5C to 60C accuracy i0.5C is controlled by Digital Temp indicator i cum i controller.

Chamber 304 SS with Exterior GI Powder Coated finish in REGULAR MODEL. Interior 304 Matt/Buff finish & Exterior 304 SS Matt finish in GMP MODEL. Two 304 SS valve-one for evacuuming and other for perging/flushing. Vacuum levels are controlled between 1" and 30"Hg.

Double walled inner made of thick S.S 304, outer made of heavy duty S.S 304. Temp range 50C to 250C Temp accuracy 2C controlled by micro processor based digital controller & air circulation for better uniformity. Supplied with s.s. wire mesh sieves.

Rectangular double walled in construction. Inner chamber made of stainless steel & outer body made of mild steel duly powder coated. Temperature range 5C above ambient to 95C. Fitted with immersion type heater, digital temperature controller cum indicator accuracy 0.5C. Operating on 230 V AC. Fitted with circular pump with stirrer to re-circulate water at constant temperature.

A Walk-in chamber is a stability chamber that is large enough for a scientist to physically walk into and perform their tests. Walk-in chamber types are prevalent in more prominent pharmaceutical companies where large batches of drugs are to be tested at the same time. Other than that, a walk in stability chamber works in the same way as a normal reach-in stability chamber by managing the parameters of temperature and relative humidity within the walk-in chamber to perform tests.As a trusted walk in stability chamber manufacturer, our commitment to precision and quality ensures that these chambers deliver reliable and accurate results, meeting the stringent standards of the pharmaceutical industry.

Furnace finds application in Industries & Laboratories for Ashing, Heat treatment, Ignitiontest, Gravimetric analysis, Determination of volatile and suspended solids & Cement testing. Heavy gauge Mild Steel construction for durability having powder coating finish. Outer Casing Made from Stainless Steel - 304 grade in all GMP Models.

Automac Density Meter is an instrument designed to check rapid measurement of liquid density. It achieves this by employing the vibraon principle of U-shaped tubes, It is used in physics, chemistry, food safety Industries like petroleum, pharmaceutical and chemicals, etc.,